Novastar A5S Plus Receiver Card LED Display HUB320 HUB210 HUB75E HUB Board HUB Adapter Plate Bakeng sa Nova AxS Series Receiver
HUB75E
HUB210
HUB320
Selelekela sa A5s PLUS
A5s Plus ke karete e akaretsang e nyane e amohelang e ntlafalitsoeng ke Xi'an NovaStar Tech Co., Ltd. (eo hamorao e tla bitsoa NovaStar).Bakeng sa li-IC tsa mokhanni oa PWM, A5s Plus e le 'ngoe e tšehetsa liqeto ho fihla ho 512×384@60Hz.Bakeng sa li-IC tsa mokhanni tse tloaelehileng,A5s Plus e le 'ngoe e tšehetsa liqeto ho fihla ho 384×384@60Hz.Ts'ehetso ea taolo ea mebala, 18bit +, boemo ba pixelkhanya le chroma calibration, ho lokisa seam ka potlako, latency e tlaase, 3D, phetoho ea gamma ka bomong bakeng sa RGB, ho potoloha ha setšoantšo ka 90 ° increments, le mesebetsi e meng, A5s Plus e ka ntlafatsa haholo phello ea pontšo le phihlelo ea mosebedisi.
A5s Plus e sebelisa likhokahanyo tse phahameng haholo bakeng sa puisano ho fokotsa litlamorao tsa lerōle le ho thothomela, e leng se bakang botsitso bo phahameng.E ts'ehetsa ho fihla ho lihlopha tsa 32 tsa data e tšoanang ea RGB kapa lihlopha tse 64 tsa data ea serial (e ka atolosoang ho lihlopha tse 128 tsa data ea serial).Lithako tsa eona tse bolokiloeng li lumella mesebetsi e tloaelehileng ea basebelisi.Ka lebaka la moralo oa eona oa lisebelisoa oa EMC oa Sehlopha sa B, A5s Plus e ntlafalitse tšebelisano ea motlakase 'me e loketse litlhophiso tse fapaneng tsa sebaka sa marang-rang.
Litšobotsi tsa A5s PLUS
Lintlafatso ho Bontša Phello
⬤Tsamaiso ea mebala
Ts'ehetsa li-gamuts tse tloaelehileng tsa mebala (Rec.709, DCI-P3 le Rec.2020) le li-gamuts tse ikhethileng tsa mebala, e nolofalletsang mebala e hlakileng haholoanyane skrineng.
⬤18bit+
Ntlafatsa ponts'o ea bohlooho ba LED ka makhetlo a 4 ho qoba tahlehelo ea bohlooho ka lebaka la khanya e tlase 'me u lumelle setšoantšo se boreleli.
⬤ Khanya ea boemo ba pixel le calibration ea chroma
Sebetsa ka sistimi ea NovaStar ea boleng bo holimo ho lekanya khanya le chroma ea pixel ka 'ngoe, ho tlosa ka nepo liphapang tsa khanya le liphapang tsa chroma, le ho etsa hore ho be le khanya e phahameng le tumellano ea chroma.
⬤ Tokiso e potlakileng ea mela e lefifi kapa e khanyang
Mehala e lefifi kapa e khanyang e bakoang ke ho kopanya likhabote kapa li-modules li ka fetoloa ho ntlafatsa phihlelo ea pono.Ts'ebetso ena e bonolo ho e sebelisa mme phetoho e qala ho sebetsa hang-hang.
Ho NovaLCT V5.2.0 kapa hamorao, phetoho e ka etsoa ntle le ho sebelisa kapa ho fetola mohloli oa video.
⬤Latency e tlase
Bakeng sa li-IC tsa mokhanni oa PWM, latency ea mohloli oa video pheletsong ea karete e amohelang e ka fokotsoa ho 1 foreimi.Bakeng sa li-ICs tsa DCLK tse tsoelang pele tsa mokhanni oa PWM, ho sebelisa latency e tlaase, ho hlokahala firmware e hlophisitsoeng.
⬤3D
Ho sebetsa le molaoli ea tšehetsang ts'ebetso ea 3D, karete e amohelang e tšehetsa tlhahiso ea setšoantšo sa 3D.
⬤ Litokiso tsa gamma tsa motho ka mong bakeng sa RGB
Ho sebetsa le NovaLCT (V5.2.0 kapa hamorao) le molaoli ea tšehetsang mosebetsi ona, karete e amohelang e tšehetsa phetoho ea motho ka mong ea red gamma, green gamma le blue gamma, e ka laolang ka katleho ho se ts'oane ha setšoantšo maemong a tlaase a bohlooho le ho fokotsa ho leka-lekana ho tšoeu. , ho lumella setšoantšo sa sebele haholoanyane.
⬤90°ho potoloha ha setšoantšo
Setšoantšo se bonts'ang se ka fetoloa ka makhetlo a mangata a 90 (0°/90°/180°/270°).
Lintlafatso tsa ho Boloka
⬤Mojule o bohlale (ho hlokahala firmware e inehetseng)
Ho sebetsa le mochine o bohlale, karete e amohelang e tšehetsa tsamaiso ea ID ea module, ho boloka li-coefficients tsa calibration le li-module parameters, ho shebella mocheso oa module, boemo ba puisano ea motlakase le flat cable, ho lemoha phoso ea LED, le ho rekota nako ea ho sebetsa ea module.
⬤Automatic module calibration
Ka mor'a hore mochine o mocha o nang le memori ea flash o kenngoe ho nkela ea khale sebaka, li-coefficients tsa calibration tse bolokiloeng mohopolong oa flash li ka kenngoa ka ho toba kareteng e amohelang ha e buletsoe, ho netefatsa hore ho na le ts'ebetso e phahameng bakeng sa khanya le chroma.
⬤ Ho kenya li-coefficient tsa calibration ka potlako
Li-coefficients tsa calibration li ka kenngoa ka potlako kareteng e amohelang, ho ntlafatsa katleho haholo.
⬤ Taolo ea Flash ea Module
Bakeng sa li-module tse nang le flash memory, tlhahisoleseding e bolokiloeng memoring e ka laoloa.Li-coefficients tsa calibration le ID ea module li ka bolokoa le ho baloa hape.
⬤ Tobetsa hanngoe feela ho kenya li-coefficients tsa calibration ho module Flash
Bakeng sa li-module tse nang le memori ea flash, ha thapo ea Ethernet e khaotsoe, basebelisi ba ka tšoara konopo ea ho itlhahloba ka har'a khabinete ho kenya li-coefficients tsa calibration mohopolong oa flash oa module ho karete e amohelang.
⬤'Mapa oa 1.0
Likhabinete li bonts'a nomoro ea karete e amohelang le tlhaiso-leseling ea boema-kepe ba Ethernet, e lumellang basebelisi ho fumana libaka le topology ea khokahano ea likarete tse amohelang habonolo.
⬤Ho beha setšoantšo se bolokiloeng pele kareteng ea ho amohela
Setšoantšo se hlahang nakong ea ho qala, kapa se hlahisoang ha thapo ea Ethernet e khaotsoe kapa ho se na lets'oao la video le ka etsoang.
⬤ Ho hlahloba mocheso le motlakase
Mocheso le motlakase oa karete e amohelang li ka hlahlojoa ntle le ho sebelisa li-peripherals.
⬤ LCD ea Khabinete
Module ea LCD e hokahaneng le khabinete e ka bonts'a mocheso, voltage, nako e le 'ngoe ea ho matha le nako eohle ea ho matha ea karete e amohelang.
⬤Ho lemoha phoso e nyane
Boleng ba puisano ea boema-kepe ba Ethernet ba karete e amohelang bo ka beoa leihlo mme palo ea lipakete tse fosahetseng e ka rekotoa ho thusa ho rarolla mathata a puisano ea marang-rang.
⬤Ho lemoha boemo ba lisebelisoa tse peli tsa motlakase
Ha lisebelisoa tse peli tsa motlakase li sebelisoa, boemo ba bona ba ho sebetsa bo ka bonoa ke karete e amohelang.
⬤ Puisano ea lenaneo la Firmware
Lenaneo la firmware la karete e amohelang le ka baloa hape 'me la bolokoa komporong ea lehae.
⬤ Phetolelo ea paramethara ea tlhophiso
Litlhophiso tsa tlhophiso tsa karete e amohelang li ka baloa hape 'me tsa bolokoa komporong ea lehae.
Lintlafatso ho Tšepahala
⬤Ho boloka likarete tse peli le ho lekola maemo
Ts'ebetsong e nang le litlhoko tsa ts'epahalo e phahameng, likarete tse peli tse amohelang li ka beoa holim'a boto e le 'ngoe bakeng sa bekapo.Ha karete ea mantlha ea ho amohela e hloleha, karete ea bekapo e ka sebetsa hanghang ho netefatsa ts'ebetso e sa sitisoeng ea skrineng.
Boemo ba ho sebetsa ba likarete tsa mantlha le tsa bekapo tse amohelang li ka hlahlojoa ho NovaLCT V5.2.0 kapa hamorao.
⬤Loop bekapo
Likarete tse amohelang le molaoli li theha loop ka likhokahanyo tsa mantlha le tsa backup.Ha phoso e etsahala sebakeng sa mela, skrine e ntse e ka hlahisa setšoantšo ka mokhoa o tloaelehileng.
⬤ Backup e habeli ea liparamente tsa tlhophiso
Mekhahlelo ea ho amohela karete ea ho amohela e bolokiloe sebakeng sa kopo le sebakeng sa fektheri sa karete e amohelang ka nako e le 'ngoe.Hangata basebelisi ba sebelisa li-parameter tsa tlhophiso sebakeng sa ts'ebeliso.Haeba ho hlokahala, basebelisi ba ka tsosolosa litlhophiso tsa tlhophiso sebakeng sa fektheri sebakeng sa kopo.
⬤Ho boloka mananeo a mabeli
Likopi tse peli tsa lenaneo la firmware li bolokiloe kareteng e amohelang fekthering ho qoba bothata ba hore karete e amohelang e ka 'na ea khomarela ka mokhoa o sa tloaelehang nakong ea ntlafatso ea lenaneo.
A5s PLUS Ponahalo
Lipontšo tsa A5s PLUS
| Sesupo | Mmala | Boemo | Tlhaloso |
| Ho matha sesupo | Botala | Ho benya hang ka mor'a 1s | Karete e amohelang e sebetsa ka mokhoa o tloaelehileng.Khokahano ea thapo ea Ethernet e tloaelehile, 'me mohloli oa mohloli oa video oa fumaneha. |
| Ho benya hang ka mor'a metsotso e meng le e meng ea 3 | Khokelo ea thapo ea Ethernet ha e tloaelehe. | ||
| Ho benya makhetlo a 3 ka 0.5s | Khokahano ea thapo ea Ethernet e tloaelehile, empa ha ho na mohloli oa video o kenang. | ||
| Ho benya hang ka mor'a 0.2s | Karete e amohelang e hlotsoe ho kenya lenaneo ho sebaka sa ts'ebeliso mme joale e sebelisa lenaneo la bekapo. | ||
| Ho benya makhetlo a 8 ka 0.5s | Phetoho ea ho fokotsa mosebetsi e etsahetse boema-kepeng ba Ethernet mme bekapo ea loop e se e sebetsa. | ||
| Matla sesupo | Khubedu | E tswelapele kamehla | Ho kenya matla ho tloaelehile. |
A5s PLUS Litekanyo
Botenya ba boto ha bo kholo ho feta 2.0 mm, 'me botenya bohle (botenya ba boto + botenya ba likarolo tse ka holimo le ka tlaase) ha bo kholo ho feta 8,7 mm.Khokahano ea fatše (GND) e lumelletsoe ho kenya masoba.
Hlokomela:
Sebaka se pakeng tsa libaka tse ka ntle tsa A5s Plus le liboto tsa hub ka mor'a hore lihokelo tsa tsona tse phahameng li kopane ke 5.0 mm.Ho khothaletsoa tšiea ea koporo ea 5-mm.
Ho etsa liforomo kapa likoti tse kenyang trepan, ka kopo ikopanye le NovaStar bakeng sa motaki oa sebopeho se nepahetseng hantle.
A5s PLUS LIPHIRI
32 Lihlopha tsa Bapisa RGB Lintlha
64 Lihlopha tsa Seriale Lintlha
Hlokomela:
Matla a khothaletsoang ke 5.0 V.
OE_RED, OE_GREEN le OE_BLUE ke lipontšo tse nolofalletsang ho bonts'a.Ha RGB e sa laoloe ka thoko, sebelisa OE_RED.Ha chip ea PWM e sebelisoa, e sebelisoa e le matšoao a GCLK.
Ka mokhoa oa lihlopha tse 128 tsa data ea serial, Data65-Data128 li ngatafalitsoe ho Data1-Data64.
Referense Moralo oa Exte felile Mesebetsi
| Lithako bakeng sa Mesebetsi e Atolositsoeng | |||
| Pin | E khothalelitsoeng Module Flash Pin | E khothalelitsoe Smart Module Pin | Tlhaloso |
| RFU4 | HUB_SPI_CLK | Reserved | Letšoao la oache la serial pin |
| RFU6 | HUB_SPI_CS | Reserved | CS letšoao la serial pin |
| RFU8 | HUB_SPI_MOSI | / | Kenyelletso ea polokelo ea data ea Module Flash |
| / | HUB_UART_TX | Smart module TX lets'oao | |
| RFU10 | HUB_SPI_MISO | / | Sephetho sa polokelo ea data ea Flash Flash |
| / | HUB_UART_RX | Smart module RX lets'oao | |
| RFU3 | HUB_CODE0 |
Pin ea taolo ea Module Flash BUS | |
| RFU5 | HUB_CODE1 | ||
| RFU7 | HUB_CODE2 | ||
| RFU9 | HUB_CODE3 | ||
| RFU18 | HUB_CODE4 | ||
| RFU11 | HUB_H164_CSD | Lethathamo la lintlha tsa 74HC164 | |
| RFU13 | HUB_H164_CLK | ||
| RFU14 | POWER_STA1 | Letšoao la ho lemoha matla a mabeli | |
| RFU16 | POWER_STA2 | ||
| RFU15 | MS_DATA | Letšoao la khokahano ea bekapo ea likarete tse peli | |
| RFU17 | MS_ID | Letšoao la boitsebiso ba ho boloka likarete tse peli | |
Hlokomela:
RFU8 le RFU10 ke lithapo tsa katoloso ea li-multiplex.Ho ka khethoa phini e le 'ngoe feela ho tsoa ho Recommended Smart Module Pin kapa Recommended Module Flash Pin e ka khethoang ka nako e le 'ngoe.
Litlhaloso tsa A5s PLUS
| Boholo ba Qeto | 512×384@60Hz (PWM driver ICs) 384×384@60Hz (Li-IC tsa mokhanni tse tloaelehileng) | |
| Litekanyetso tsa Motlakase | Matla a kenyang | DC 3.8 V ho isa ho 5.5 V |
| E lekantsoe hajoale | 0.6 A | |
| Tekanyetso ea tšebeliso ea matla | 3.0 W | |
| Tikoloho ya Tshebetso | Mocheso | -20°C ho ea ho +70°C |
| Mongobo | 10% RH ho isa ho 90% RH, e sa fokotseng | |
| Sebaka sa polokelo | Mocheso | -25°C ho ea ho +125°C |
| Mongobo | 0% RH ho isa ho 95% RH, e sa fokotseng | |
| Litlhaloso tsa 'Mele | Litekanyo | 70.0 limilimithara × 45.0 limilimithara × 8.3 limilimithara |
| Boima bo kahare | 16.2 g Tlhokomeliso: Ke boima ba karete e amohelang e le 'ngoe feela. | |
| Boitsebiso ba ho Paka | Litlhaloso tsa ho paka | Karete e 'ngoe le e' ngoe e amohelang e kenngoa ka har'a pakete ea blister.Lebokose le leng le le leng la ho paka le na le likarete tse amohelang tse 80. |
| Litekanyo tsa lebokose la ho paka | 392.0 limilimithara × 200.0 limilimithara × 123.0 limilimithara | |
Chelete ea tšebeliso ea hona joale le ea matla e ka fapana ho latela lintlha tse fapaneng joalo ka litlhophiso tsa sehlahisoa, ts'ebeliso le tikoloho.
Lihlopha tsa lihlahisoa
-
Huidu E63 LED Single Color Control Card Card Litšenyehelo ef...
-
Novastar Taurus TB2-4G WIFI Media Player E nang le H...
-
Huidu Multimedia Player A6L Asynchronous le Sy...
-
Huidu W63 Single Dual Color LED Control Card Card Su...
-
Novastar DH7508 Karete ea ho Fumana Pontšo ea LED
-
Huidu A6 Synchronous And Asynchronous LED Displ...
