G-energy JPS200PV3.8-2.8A5 LED Display Power Supply 100-240V Input

Tlhaloso e Khutšoanyane:

Motlakase o na le litšobotsi tsa molumo o monyenyane, bokhoni bo phahameng, ts'ebetso e tsitsitseng le ho tšepahala ho phahameng.Motlakase o na le input under-voltage, output current limiting, output short circuit joalo-joalo.Potoloho ea synchronous rectifier e ntlafatsa haholo ts'ebetso ea phepelo ea motlakase mme e boloka tšebeliso ea matla.Motlakase o kenyelletsa motlakase o pharaletseng, mocheso o pharaletseng, o nang le potoloho ea matla a matla, 'me o na le mefuta e mengata ea likopo.

POTSO HONA Whatsapp Email

Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Tlhaloso e ka Sehloohong ea Sehlahisoa

Matla a Output

(W)

Kenyeletso e Lekanyelitsoeng

Palo ea li-volts

(Vac)

Sephetho se lekantsoeng

Motlakase (Vdc)

Output Current

Range

(A)

Nepahalo

Ripple le

Lerata

(mVp-p)

136

90-264

+3,9

0-20.0

±2%

≤200mVp-p @25℃

+2,9

0-20.0

Boemo ba Tikoloho

Ntho	Tlhaloso	Tech Spec	Yuniti	Ela hloko
1	Mocheso o sebetsang	-30—60	℃	Sheba tšebeliso ea mocheso oa tikoloho le sekhahla sa mojaro.
2	Ho boloka mocheso	-40—85	℃
3	Mongobo o amanang	10-90	%
4	Mokhoa oa ho tlosa mocheso	Pholiso ea tlhaho
5	Khatello ea moea	80-106	Kpa

Sebopeho sa Motlakase

1	Sebopeho sa ho kenya
Ntho	Tlhaloso	Tech Spec	Yuniti	Ela hloko
1.1	Lebelo la motlakase le lekantsoeng	200-240	Vac	Sheba ho setšoantšo sa ho kenya matla le mojaro kamano.
1.2	Maqhubu a kenyang	47—63	Hz
1.3	Katleho	≥85.0	%	Vin=220Vac 25℃ Output Full Mojaro (mocheso oa kamore)
1.4	Ntho e sebetsang hantle	≥0.40		Vin=220Vac E lekantsoe motlakase oa ho kenya, tlhahiso e felletseng ea mojaro
1.5	Boholo ba hona joale	≤3	A
1.6	Dash current	≤70	A	@220Vac Teko ea boemo bo batang @220Vac
2	Sebopeho sa sephetho
Ntho	Tlhaloso	Tech Spec	Yuniti	Ela hloko
2.1	Sekhahla sa motlakase o tsoang	+5.0	Vdc
2.2	Boemo ba hona joale ba tlhahiso	0-40.0	A
2.3	Output voltageable mefuta-futa	4.2-5.1	Vdc
2.4	Lethathamo la matla a tsoang	±1	%
2.5	Taolo ea mojaro	±1	%
2.6	Ho nepahala ha matla a motlakase	±2	%
2.7	Sephetho ripple le lerata	≤200	mVp-p	Kenyelletso e lekantsoeng, tlhahiso mojaro o felletseng, 20MHz bandwidth, lehlakore la mojaro le 47uf/104 capacitor
2.8	Qala tieho ea tlhahiso	≤3.0	S	Vin=220Vac @25℃ teko
2.9	Nako ea ho phahamisa motlakase	≤90	ms	Vin=220Vac @25℃ teko
2.10	Phetoho ea mochini o fetohang	±5	%	Teko maemo: mojaro o felletseng, Mokhoa oa CR
2.11	Sephetho se matla	Phetoho ea motlakase e ka tlase ho ± 10% VO;e matla nako ea ho arabela e ka tlase ho 250us	mV	LAEA 25%-50%-25% 50%-75%-50%
3	Sepheo sa tshireletso
Ntho	Tlhaloso	Tech Spec	Yuniti	Ela hloko
3.1	Kenya motlakase o tlase tshireletso	135-165	VAC	Maemo a teko: mojaro o tletseng
3.2	Kenya motlakase o tlase sebaka sa ho hlaphoheloa	140-170	VAC
3.3	Moeli oa hona joale oa tlhahiso tshireletso ntlha	46-60	A	HI-CUP e khathatsehile ho ipholla, qoba tshenyo ya nako e telele ho matla ka mora a matla a nako e khuts'oane.
3.4	Sephetho sa potoloho e khuts'oane tshireletso	Boiketsi ba ho Ipholosa	A
3.5	ho feta mocheso tshireletso	/
4	Sebopeho se seng
Ntho	Tlhaloso	Tech Spec	unit		Ela hloko
4.1	MTBF	≥40,000	H
4.2	Leakage Current	＜1(Vin=230Vac)	mA		Mokhoa oa tlhahlobo oa GB8898-2001

Litšobotsi tsa Tumellano ea Tlhahiso

Ntho	Tlhaloso		Tech Spec	Ela hloko
1	Matla a Motlakase	Kenya tlhahiso	3000Vac/10mA/1min	Ha ho na arcing, ha ho na ho senyeha
2	Matla a Motlakase	Kenya mobung	1500Vac/10mA/1min	Ha ho na arcing, ha ho na ho senyeha
3	Matla a Motlakase	Se hlahisoang fatše	500Vac/10mA/1min	Ha ho na arcing, ha ho na ho senyeha

Relative Data Curve

Kamano pakeng tsa mocheso oa tikoloho le mojaro

Kenyelletso ea motlakase le curve ea motlakase oa mojaro

Mojaro le curve e sebetsang hantle

Sebopeho sa mochini le tlhaloso ea lihokelo (yuniti: mm)

Litekanyo: bolelele× bophara× bophahamo=140×59×30±0.5.
Likarolo tsa Likoti tsa Kopano

Ka holimo ke pono e ka holimo ea khetla e ka tlaase.Litlhaloso tsa li-screws tse tsitsitseng tsamaisong ea bareki ke M3, kakaretso ea 4. Bolelele ba li-screws tse tsitsitseng tse kenang 'meleng oa motlakase ha lia lokela ho feta 3.5mm.

Tlhokomeliso Bakeng sa Kopo

Phepelo ea matla e le hore e be tšireletso e sireletsehileng, lehlakore lefe kapa lefe la khetla ea tšepe le kantle e lokela ho ba sebaka se sireletsehileng ho feta 8mm.Haeba e ka tlase ho 8mm e hloka ho penta botenya ba 1mm ka holim'a lakane ea PVC ho matlafatsa ts'ebetso.
Tšebeliso e sireletsehileng, ho qoba ho kopana le mocheso oa mocheso, ho fella ka ho tsosoa ha motlakase.
PCB boto ntseng bo eketseha lesoba stud bophara sa feteng 8mm.

Hloka poleiti ea aluminium ea L355mm*W240mm*H3mm e le sink e thusang ea mocheso.

Ho thoe'ng haeba ke sa tsebe ho hlokomela skrine?

K: Re tla u fa bukana ea ts'ebetso le software ha u etsa odara, 'me re ka u thusa ho lokisa liphoso u le hole.

Nka beha odara joang?

A: Taba ea pele, ka kopo fana ka lintlha tsa litlhoko tsa hau ka mokhoa o hlakileng ka hohle kamoo ho ka khonehang, e le hore re ka u romella tlhahiso lekgetlo la pele.

Nka isa thepa ea ka joang?

A: E ipapisitse le tekanyetso ea hau le letsatsi leo u hlokang skrineng se etelletsoeng pele.Hangata, lipontšo tse etelletsoeng pele li romelloa ka leoatleng, haeba bongata bo le tlase 'me u bo hloka ka potlako, re ka u lokisetsa ho tsamaisa moea.

Na processor ee ea video e tšehetsa sistimi ea taolo ea Nova?

A: E, processor ea rona ea video ke mokhoa oa bokahohle, o tšehetsa tsamaiso e ngata ea taolo e kang Linsn / Colorlight / Nova / Dbstar joalo-joalo.

Mokhoa oa ho sebetsa le uena?

A: Ho bua ka lengolo-tsoibila kapa inthaneteng ho re tsebisa tlhoko ea hau.Haeba o hloka hore re etse qeto bakeng sa pontšo ea hau e etelletsoeng pele, re thabela ho u sebeletsa mahala.

Ke hobane'ng ha u re khetha?

A: Re na le theko e ntle ka ho fetisisa, boleng bo botle, boiphihlelo bo bongata, ts'ebeletso e ntle haholo, karabo e potlakileng, ODM&OEM, ho fana ka potlako joalo-joalo.

Taolo ea boleng ba lihlahisoa tsa hau ke efe?

A: Boleng ke morero oa rona oa pele.Re ela hloko haholo qalong le qetellong ea tlhahiso.Lihlahisoa tsa rona li fetile CE & RoHs & ISO & FCC setifikeiti.

Ts'ebeletso ea hau ea kamora thekiso ke efe?

A: Re ka fana ka tiiso ea 100% bakeng sa lihlahisoa tsa rona.Haeba u na le lipotso, u tla fumana karabo ea rona nakong ea lihora tse 24.

Odara ea hau e tlase ke bokae?

A: Ka kakaretso, palo ea rona e fokolang ea odara ke sengoathoana se le seng.Empa ha palo e le kholo, theolelo e kholoanyane.

Lipehelo tsa thomello le linako tsa thomello tsa k'hamphani ea hau ke life?

A: Nako ea ho fana / tlhahiso e ameha ka ho toba ke boholo ba taelo.Hape, ka kopo hlokomela, lifeme tse ling li kanna tsa se u eletse, empa kamora tieho ea tlhahiso, u kanna oa tobana le tieho ea matsatsi a seng makae pele u ts'oara leoatle kapa maeto a hau a sefofane.(e ka ba kae kapa kae ho tloha matsatsing a 3 ho isa ho a 7).Hape, ho itšetlehile ka hore na u romela ka sehla sefe.

E fetileng: G-energy J300V5.0A13 LED 5V 60A LED Video Wall Power Switching Supply

E 'ngoe: G-energy JPS200V5-A 110V/220V 5V 40A Phepelo ea Matla a LED